25
INSTALLATION
Esprit - Installation and Servicing
FLUE OUTLET
Note.
A flat or pitched roof flashing plate (not supplied) is required before
proceeding with the installation of this kit.
This kit is suitable for both flat and pitched roof terminations, using a
concentric flue to run vertically from the top of the boiler and terminating
above roof level.
WEATHER PROOFING
Where the flue passes through the roof line an adequate seal must
be made. This is achieved by using either:
- Flat roof weather collar
or
- Universal weather collar.
ACCESSORIES
Flue Duct Extension Kits are available for
flue lengths extending beyond 1m. These
packs contain 1m extension ducts and may
be cut to the desired length.
If the offset vertical option is used an elbow
Kit is required. For a full accessories list
refer to page 6, Optional Extras and Frames
26 and 28, Flue Arrangement.
Flue
duct
support
Vertical connector
UIN 204180
90
o
elbow
UIN 203130
45
o
elbow
UIN 203131
Roof Flue Extension Duct
UIN 203129
esp9177
Flue Terminal
UIN 203132
Flue Seal Collar - Flat Roof
UIN 152259
Flue Seal Collar - Tile Roof
UIN 152258
26
ROOF FLUE KIT CONTENTS / OPTIONS
25
FITTING THE OPTIONAL ROOF FLUE KIT (Flat or Pitched)
nm8736
To Next Page
Loading...
Need help?
General
