EasyManuals Logo
Home>IKEA>Dishwasher>DISKAD

IKEA DISKAD User Manual

IKEA DISKAD
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
Tip:To avoid impairing the drying per-
formance, do not position items of
tableware directly in front of the intake
opening or the blow opening of the
container.
Do not position heat-sensitive items of
tableware directly in front of the blow
opening of the container.
→"Appliance", Page16
AquaSensor
The AquaSensor is an optical measuring
device (light barrier) which measures
the turbidity of the washing water. You
can save water with the AquaSensor.
Use of the AquaSensor depends on the
programme. If the soiling level is low,
the washing water is used in the next
wash cycle, allowing water consumption
to be reduced by 3-6 litres. If the soiling
level is is higher, the washing water is
drained off and replaced with fresh wa-
ter. In the automatic programmes the
temperature and running time are addi-
tionally adjusted to the level of soiling.
Installation and connection
Installation and connection
To ensure proper operation, connect
the appliance to the power and water
supply correctly. Observe the specified
criteria and the installation instructions.
Scope of supply
After unpacking all parts, check for any
damage in transit and completeness of
the delivery.
If you have any complaints, contact IKEA
or our Customer Service.
Note:The appliance was tested at the
factory to check it is in working order. It
is possible that water has left marks on
the appliance. These marks will disap-
pear after the first wash cycle.
The delivery consists of the following:
Dishwasher
Operating instructions
Installation Instructions
Installation material
Steam guard plate
Mains cable
Quick reference guide
Installing and connecting the
appliance
You can position your built-under or in-
tegrable appliance in a fitted kitchen
between wooden and plastic walls. If
you subsequently install your dish-
washer as a free-standing appliance,
you must stop it from tipping over, e.g.
by screwing it to the wall or installing it
under a continuous worktop that is se-
curely connected to adjacent cabinets.
1. Follow the safety instructions.
→Page5
2. Follow the instructions for electrical
connection. →Page15
3. Check the Scope of supply and the
condition of the appliance.
4. Consult the installation instructions
for the installation dimensions re-
quired.
5. Make the appliance level using the
height-adjustable feet.
Make sure that the appliance is
standing on the floor securely.

Table of Contents

Other manuals for IKEA DISKAD

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IKEA DISKAD and is the answer not in the manual?

IKEA DISKAD Specifications

General IconGeneral
BrandIKEA
ModelDISKAD
CategoryDishwasher
LanguageEnglish

Related product manuals