38
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Overview of basic settings
The basic settings depend on the features of your appliance.
BASIC SETTING DISPLAY
TEXT
SELECTION DESCRIPTION
Water hardness H:04 H:00 - H:07 Set the water softening sys-
tem to your water hardness.
→"Setting water softening sys-
tem", Page28
Level H:00 switches the water
softening system off.
Rinse aid dispens-
ing
r:05 r:00 - r:06 Set the amount of rinse aid to
be dispensed.
→"Setting the amount of rinse
aid", Page30
Switch the rinse aid system
off with level r:00.
Sensor setting SE:00 SE:00 - SE:02 Set the water sensor for
identifying soiling.
Extra Dry d:00 d:00 - d:01 The temperature is increased
during the final rinse, which
improves the drying result.
This may increase the run
time slightly.
Note:Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d:01" or
off "d:00".