36
2. Check the washing tank and ac-
cessories for soiling and clean if ne-
cessary.
→"Cleaning and servicing", Page41
Basic operation
Basic operation
You can find out everything you need to
know about operating your appliance
here.
Opening appliance door
● Open the appliance door.
Switching on the appliance
●
Press .
The Eco 50° programme is set by de-
fault.
The Eco 50° programme is an espe-
cially environmentally friendly pro-
gramme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
If you do not perform any actions on
the appliance for 15 minutes, the ap-
pliance will automatically switch off.
Setting a programme
To adjust the wash cycle to the soiling
level of the tableware, select a suitable
programme.
● Press the right programme button.
a The programme is set and the pro-
gramme button flashes.
Setting additional functions
You can set additional functions to com-
plete the washing programme selected.
Note:The additional functions which
can be used depend on the programme
selected.
● Press the button for the relevant ad-
ditional function.
a The additional function is set and the
additional function button flashes.
Setting timer programming
1.
Press or .
a "00h:00m" appears on the display.
2.
Use or to set the required
start time for the programme.
3.
Press .
a This activates time preselection.
Tip:To deactivate timer programming,
press or repeatedly until
"00h:00m" appears in the display.
Starting the programme
●
Press .
a The programme has ended when the
display shows "00h:00m".
Notes
● If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as a
handle for the top basket. You might
touch the partially dissolved tablet.
To Next Page
Loading...
Need help?
General
