41
Changing basic settings
1. Open the appliance door.
2.
Press .
3. To open the basic settings, press
for 3 seconds.
a The display shows H:xx.
a The display shows .
4.
Press repeatedly until the
display shows the required setting.
5.
Press or repeatedly until the
display shows the right value.
You can change several settings.
6.
To save the settings, press
for 3 seconds.
7. Close the appliance door.
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important to
clean and maintain it carefully.
Cleaning the tub
WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
● Never use detergents containing
chlorine.
1. Remove any coarse soiling in the in-
terior with a damp cloth.
2. Add detergent to the detergent dis-
penser.
3. Select the programme with the
highest temperature.
4. Start the programme without table-
ware. →Page36
Self-cleaning interior
To remove deposits, the appliance self-
cleans the interior at regular intervals.
The programme sequence is automatic-
ally adjusted for self-cleaning, e.g. the
cleaning temperature is briefly in-
creased. Consumption values, e.g. wa-
ter and electricity, may also increase.
If the interior is no longer self-cleaned
adequately and deposits occur, see this
information:
→"Cleaning the tub", Page41.
Cleaning products
Only use suitable cleaning products to
clean your appliance.
→"Safe use", Page12
Tips on appliance care
Follow the tips on appliance care to
make sure your appliance functions
properly at all times.
ACTION BENEFIT
Wipe the door
seals, the front of
the dishwasher
and the control
panel regularly
using a damp
cloth and wash-
ing-up liquid.
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
If the appliance is
not going to be
used for a while,
leave the door
slightly ajar.
This will prevent
unpleasant
odours.