IKEA DISKAD User Manual

37
● You can only change a programme
when running if you cancel it.
→"Terminate programme", Page37
● The appliance switches off automat-
ically 1minute after the end of the
programme to save energy. If you
open the appliance door immediately
after the programme has ended, the
appliance will switch off after 4
seconds.
Interrupting programme
Note:When you open the appliance
door once the appliance has heated up,
leave the door slightly ajar for a few
minutes and then close it. This will help
prevent excess pressure building up in
the appliance and stop the appliance
door bursting open.
1.
Press ⁠.
a The programme is saved and the ap-
pliance switches off.
2.
Press to resume the programme.
Terminate programme
To end a programme early or to switch
from a programme that has already
started, you will need to cancel it first.
1. Open the appliance door.
2.
Press for approx.
3seconds.
3. Close the appliance door.
a The programme is canceled and
ends after approx. 1minute.
Switching off appliance
1. Please note the information on Safe
use →Page12.
2.
Press .
Tip:If you press during the wash
cycle, the programme currently running
will be interrupted. When you switch
the appliance back on, the programme
continues automatically.

IKEA DISKAD Specifications

General

Brand	IKEA
Model	DISKAD
Category	Dishwasher
Language	English