IKEA DISKAD User Manual

15
6. Install the drainage connection.
→Page15
7. Install the drinking water connection.
→Page15
8. Connect the appliance to the power
supply.
Drainage connection
Connect your appliance to drainage
connection so dirty water is discharged
via the wash cycle.
Installing the drainage
connection
1. Consult the installation instructions
supplied for the steps required here.
2. Connect the wastewater hose to the
outlet connection of the siphon using
the enclosed parts.
3. When doing so, check that the
wastewater hose is not kinked,
crushed or twisted.
4. Also check that there is no cover in
the drainage system preventing the
wastewater from being discharged.
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note:If you are replacing the appli-
ance, you must use a new water supply
hose.
1. Consult the installation instructions
supplied for the steps required here.
2. Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the Technical data
→Page58.
3. When doing so, check that the drink-
ing water connection is not kinked,
crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to
the electricity supply
Notes
● Follow the Safety instructions
→Page6.
● Connect the appliance to alternating
current only, in the range of 220 -
240V and 50Hz or 60Hz.
● Please note that the water safety sys-
tem is only functional if there is a
power supply.
1. Insert the non-heating appliance
plug of the power cable into the ap-
pliance.
2. Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
3. Check that the mains plug is inserted
properly.

IKEA DISKAD Specifications

General

Brand	IKEA
Model	DISKAD
Category	Dishwasher
Language	English