IKONIX SCI 295 User Manual

hipot.com 19
START
PROGRAM A MEMORY: CHANGE VOLTAGE - DC
When VOLT is selected. Press the
rotary knob to edit the Voltage.
The rst digit of Voltage will blink.
Turn the yellow rotary knob to
scroll to desired parameter to
edit VOLT.
Turn the rotary knob to change
the Voltage setting for each digit.
Press the rotary knob to select the
setting and move to the next digit.
When done, you will be returned
to the previous menu.
START
PROGRAM A MEMORY: TYPE DC
When TYPE is selected. Press the
rotary knob to edit the Test Type.
The options will blink.
Turn the yellow rotary knob to
scroll to desired parameter to
edit, TYPE.
Turn the rotary knob to change
the Test Type: ACW, DCW or IR.
Press the rotary knob to select
the Test Type.
You will be returned to the
previous menu.
5. Setting a DC Hipot Test
The DC Hipot test can be programmed into any of the 5 memory locations in a similar manner as the AC Hipot test. From
the main menu, select the memory location that you desire to program with the DC Hipot test.

IKONIX SCI 295 Specifications

General

Brand	IKONIX
Model	SCI 295
Category	Test Equipment
Language	English