IKONIX SCI 295 User Manual

hipot.com 23
START
PROGRAM A MEMORY: CHANGE CONNECT
When CONN is selected. Press the
rotary knob to edit the Connect
Setting. The options will blink.
Turn the yellow rotary knob to
scroll to desired parameter to
edit CONN.
Turn the rotary knob to change
the Connect setting: ON or OFF.
Press the rotary knob to select
the setting.
You will be returned to the
previous menu.
START
PROGRAM A MEMORY: TYPE IR
When TYPE is selected. Press the
rotary knob to edit the Test Type.
The options will blink.
Turn the yellow rotary knob to
scroll to desired parameter to
edit, TYPE.
Turn the rotary knob to change
the Test Type: ACW, DCW or IR.
Press the rotary knob to select
the Test Type.
You will be returned to the
previous menu.
6. Setting an IR Test
The IR test can be programmed into any of the 5 memory locations in a similar manner as the AC or DC Hipot test. From
the main menu select the memory location that you desire to program with the IR test.

IKONIX SCI 295 Specifications

General

Brand	IKONIX
Model	SCI 295
Category	Test Equipment
Language	English