Safety
Intended Use
The scanner is used for scanning images and documents. The documents
must comply with the characteristics described in the technical
specifications. The scanner is designed for use in enclosed spaces in the
commercial sector.
Intended use also includes observing and following all information
provided in these instructions, especially the safety instructions. Any other
use is considered improper and will void the warranty and liability claims.
Ambient Conditions
Ensure that the scanner is used exclusively under the following
environmental conditions:
• Ambient temperature during operation: 5 to 40 °C (40 to 105 °F)
• Storage temperature: 0 to 60 °C (32 to 140 °F)
• Relative humidity: 20 to 80 %, non-condensing
➢ Ensure that the scanner is not exposed to direct sunlight.
Basic Safety Information
Avoid Injury or Death by Electric Shock
➢ Never open the housing of the scanner.
➢ Do not expose the scanner to dripping or splashing water and do not
place any vessel filled with liquid on the scanner. Penetrating liquid can
damage the scanner.
➢ Do not insert objects through existing slots or openings into the interior
of the scanner.
➢ Only connect the scanner with the plug of the supplied AC adapter to a
professionally installed and grounded outlet.
➢ Do not use the AC adapter if the power supply's housing or the cable are
damaged. In this case, replace the power supply with a power supply of
the same type.
➢ Do not use the scanner if it is visibly damaged. In this case, unplug the
power cord from the wall outlet. Contact Image Access technical
support, see section Technical Support starting at page 7.
To Next Page
Loading...
Need help?
General
