Infineon CYPRESS User Manual

user guide 16 of 38 002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Programming Operations
5.2 Program Device
1. Connect the device to the host computer and select it in the Probe/Kit drop-down.
2. Select the programming file as described in Load Programming File section.
3. Connect to the device (see Connect Device).
4. Click the Program button.
CYP programs the device and displays various messages in the Log. Then, a message in the Status Bar indicates
that device was programmed successfully or that an error occurred.

Infineon CYPRESS Specifications

General

Brand	Infineon
Model	CYPRESS
Category	Motherboard
Language	English