Infineon CYPRESS User Manual

user guide 36 of 38 002-25230 Rev. *F
2022-03-17
CYPRESS™ Programmer
GUI user guide
Upgrading Firmware
6. Click the Upgrade Firmware button to start the upgrade process.
After the upgrade process completes, the message "Firmware of 'KitProg2-xx' upgraded successfully" displays
in the Log view. The KitProg2-xx device disappears from the Probe/Kit drop-down. The Probe/Kit drop-down is
populated with the names of the supported KitProg3 Kits.
6.2 Upgrade KitProg3 on Kit or MiniProg4 Firmware
Follow this process to upgrade KitProg3 on a kit or MiniProg4 firmware:
1. Run the CYP application.
2. As needed, go to Options > Programmer Options and select the Show Pop-Up value for the Upgrade
Firmware option.
3. Connect the KitProg3/MiniProg4 device to the host PC. A warning dialog with the "Firmware is Out of Date"
message displays.
4. Click the Upgrade Firmware button to start the upgrade process.
After the upgrade process completes, the message "Firmware of 'KitProg3-xx' upgraded successfully" or
"Firmware of 'MiniProg4 xx' upgraded successfully" displays in the Log view.

Infineon CYPRESS Specifications

General

Brand	Infineon
Model	CYPRESS
Category	Motherboard
Language	English