InFocus INF6502WB - Advanced Option

DRAFT
Page 47INF6502WB/INF6502LC/INF7002WB/INF7002LC User Guide
Advanced Option
Sel Adjust Enter Back Quit
< >
<
<
ADVANCED OPTION
GAMMA SELECTION
OVER SCAN
IR CONTROL
KEYPAD CONTROL
DDC/CI
ADVANCED OPTION RESET
MODE1
ON
NORMAL
LOCK
ON
NO
Gamma Selection: adjusts the gamma value of the image and optimizes image brightness and contrast. Options
include: Mode 1, Mode 2, Mode 3.
Over scan: removes noise around the edges of a video image. Options include: On and Off (default).
IR Control: disables and enables the IR sensor on the monitor. Options include: Normal (default; IR is enabled) and Lock
(IR is disabled).
Keypad Control: disables and enables the keypad on the right-hand side of the monitor. Options include: Lock (keypad
is disabled) and Unlock (default; keypad is enabled).
DDC/CI: enables and disables DDC/CI communication. Options include: On (default) and Off.
Advanced Option Reset: resets all Advanced Option menu items to factory default settings. Options: Yes and No.