Page 14
Freeze: When enabled, freezes the image which is currently displayed.
Blank: Toggles between the source and a blank black screen.
Dimming: Adjusts brightness level.
USING THE KEYPAD
The keypad, located on the side of the monitor, has the following buttons:
^
^
^
^
Power button: Switches the power on or puts the monitor into Standby.
Input button: Turns the Source menu on allowing the user to change sources. Saves
changes/selections if the OSD menu is on.
^ button: Moves the highlight bar up when the OSD or Source menu is on.
v button: Moves the highlight bar down when the OSD or Source menu is on.
< button: When the OSD menu is on, this button decreases the value of selected OSD
items. When the OSD menu is off, this button decreases the audio volume.
> button: When the OSD menu is on, this button increases the value of selected OSD
items. When the OSD menu is off, this button increases the audio volume.
Menu button: Turns the OSD menu on and off.