Programming Manual
Programming SmartLoop 29
10.1.2 Working with solutions
Each product, from the simplest device to the most complicated, is represented by a solution that
comprises the respective programming parameters and the installation procedure.
Each solution is dedicated to a device type and has its own programming interface. You can work on
several solutions contemporarily, even if they relate to different device types. Each solution has its
own account (next to the Start page) which is always available:
In this way, it is possible to compare different solutions, or keep two solutions open (one real and the
other for test purposes) and verify the effects of the programming process.
A solution can be created and changed without computer-to-device link up. For example, you can
prepare a system layout and/or set parameters without leaving your office. The data can be
downloaded to the system when you are ready.
10.1.3 How to create a solution and program devices
1. Select New Solution from the Recent Solutions section.
2. Select SmartLoop:
A programming interface related to the selected device appears (refer to Chapter 11 - The SmartLoop
programming interface).
To Next Page
Loading...
Need help?
General
