Programming Manual
Maintenance operations 67
27.3 Forcing the output status of devices
FROM COMPUTER
Not available.
On first power-up, or during maintenance, it may become necessary to switch the output of a device
On/Off manually.
FROM PANEL
<any key>, 7 Maintenance, <code>, 3 TEST Outputs, 1 Loop Output,
x Loop x, yyy device,
or
<any key>,
7
<code> 3 1 x yyy
Press keys and to view the adjacent
detectors.
Press ESC to confirm and step back to
the previous menu.
27.4 Forcing the output status of the control panel
FROM COMPUTER
Not available.
On first power-up, or during maintenance, it may become necessary to switch the output of the
control panel On/Off manually.
FROM PANEL
<any key>, 7 Maintenance, <code>, 3 TEST Outputs, 2 Panel Output,
x Output,
or
<any key>,
7
<code> 3 2 x
Press keys and to view the adjacent
outputs.
Press ESC to confirm and step back to
the previous menu.
27.5 Forcing the device LEDs On
FROM COMPUTER
Not available.
On first power-up, or during maintenance, it may become necessary to switch the device LEDs On
manually. For example, in order to allow quick identification of a specific detector inside a large place
with many detectors.
FROM PANEL
<any key>, 7 Maintenance, <code>, 4 Test Point LED, x Loop x,
yyy device,
or
<any key>,
7
<code> 4 x yyy
Press keys and to view the adjacent
devices.
Press ESC to confirm the entry and step
back to the previous menu.
Point x/yyy < Description >
Type : < Device Type >
STATUS : _FF
= Select Point = Output ON/OFF
Supervised alarm output
STATUS : _FF
= Output Select = Output ON/OFF
Point x/yyy < Description >
Type : < Device Type >
STATUS : _py OFF
= Select Point = Output ON/OFF
To Next Page
Loading...
Need help?
General
