Inovance IS300 Series User Manual

- 138 -
MF.K Key function
selection
Factory default
value
0
0 MF.K Key function inenabled
1
Switching between operation
panel command channel and
remote command channel
(terminal command channel or
serial port communication
command channel)
2
Switching between forward
rotation and reverse rotation
F7-01
Setup range
3 Forward rotation Jog command
MF.K Key refers to multifunctional key. It can set and define the function of
MF.K key on the keyboard via this parameter. It can perform switching via
this key both in the stop and running process.
0: This key has no function.
1: Switching between keyboard command and remote operation. It refers to
switching of command source, switching from the current command source to
the keyboard control (local operation). If the current command source is
keyboard control, this command is inenabled.
2: Switching between forward rotation and reverse rotation
It can switch the direction of the frequency command via the MF.K key on the
keyboard. It is enabled only in the operation panel command channel.
3: Forward rotation Jog
It can realize forward rotation Jog (FJOG) via the MF.K key on the keyboard.
STOP/RESET key function
Factory default
value
0
0
Enabled only in the keyboard control
mode
1
STOP key enabled in the terminal
control mode
F7-02
Setup
range
2
STOP reset function enabled in the
terminal control mode

Inovance IS300 Series Specifications

General

Brand	Inovance
Model	IS300 Series
Category	Servo Drives
Language	English