Inovance IS300 Series User Manual

- 49 -
4.3 Shortcut Menu Operation Mode
The shortcut menu is set to facilitate the user to quickly view and modify the
commonly used function parameters. In the shortcut menu, the parameter is
displayed in the form of “UA3-01”, which indicates the function parameter
A3-01. Parameter modification in the shortcut menu has the same effect as the
operation in the common programming status.
The shortcut menu can contain 16 function parameters at most. If there are 16
parameters and the user wants to add more, it will display “FULL”. If “NULL” is
displayed when entering the menu, it indicates that the shortcut menu is NULL.
The shortcut menu operation is limited by the function code F7-03. When F7-3
is set to “0”, addition or deletion operation can be performed on the shortcut
menu. When F7-03 is set to “1”, the parameter option is locked and addition or
deletion operation is inenabled.
The shortcut menu has stored the 16 common parameters by default for the
convenience of the user:
uA3-01 Maximum rotation speed
uA3-02 System oil pressure
uA3-03 Maximum oil pressure
uA3-04 Oil pressure command
risetime
uA3-05 Kp1Oil pressure control
Kp1
uA3-06 Ti1 Oil pressure control Ti1
uA3-07 Td1 Oil pressure control
Td1
uA3-08 Maximum reverse rotation
speed
uA3-09 Minimum flow
uA3-10 Minimum pressure
A3-20 AI zero drift auto correction
uF2-00 Speed loop proportional
gain 1
uF2-01 Speed loop integration
time 2
uF2-03 Speed loop proportional
gain 2
uF2-04 Speed loop integration
time 2
uF4-32 AI3 Input filter time
The user can edit the shortcut menu in accordance with the actual needs.
1) Add shortcut parameter item:
Stop Display
Flash Display
Stop Flashing
Fig.4-4 Example of Adding Shortcut Parameter Item
Note: When pressing QUICK key during the programming of level 2 menu, the

Inovance IS300 Series Specifications

General

Brand	Inovance
Model	IS300 Series
Category	Servo Drives
Language	English