Intel® Server Board S1200SP Family Technical Product Specification
3
Display Port from CPU
Integrated 2D video controller
in BMC
Integrated 2D video controller
in BMC
Integrated 2D video controller
in BMC
1x Display Port
1x DB-15 video connector
1x DB-15 video connector
BMC
IPMI 2.0
1x on-board dedicated RMM4
NIC connector
BMC
IPMI 2.0
1x on-board dedicated RMM4
NIC connector
Intel
®
Remote Management
Module 4 Lite solutions
Intel
®
Remote Management
Module 4 Lite solutions
2x USB 3.0 ports at the back
of the board
2x USB 2.0 ports at the back
of the board
One 2x10 pin USB 3.0 header,
providing front panel support
for two USB ports respectively
One 2x5 pin USB 2.0 header,
providing front panel support
for two USB ports respectively
1x internal Type-A USB 2.0
port
2x USB 3.0 ports at the back
of the board
2x USB 2.0 ports at the back
of the board
One 2x5 pin USB 2.0 header,
providing front panel support
for two USB ports respectively
1x internal Type-A USB 2.0
port
2x USB 3.0 ports at the back
of the board
2x USB 2.0 ports at the back
of the board
One 2x10 pin USB 3.0 header,
providing front panel support
for two USB ports respectively
One 2x5 pin USB 2.0 header,
providing front panel support
for two USB ports respectively
1x internal Type-A USB 2.0
port
Note: The server board S1200SPL and S1200SPS support full height full length PCIe* cards. See the
following table for the limitations when the server boards is installed in server chassis P4000XXSFDR.
Table 2. Limiting Conditions of PCIe* Card Form Factor
Conditions for full height and half length card
Conditions for full height and ¾ length card
Mezzanine SAS module is installed or SATA port 4-7 are
occupied.
Mezzanine slot and SATA port 4-7 are not occupied.
Mezzanine SAS module is installed or SATA port 0-3 are
occupied.
Mezzanine slot and SATA port 0-3 are not occupied.
Mezzanine SAS module is installed.
Mezzanine slot is not occupied.