Intel S1200SPL User Manual

Intel® Server Board S1200SP Family Technical Product Specification
78
Table 38. SATA/SATADOM capable Connector Pin-out (J1K4, J1K1, J1K5, J1K2, J2K4, J2K3, J2K1, J2K2)
Pin
IO
Signal Name
MH1
PWR
GND
1
GND
GND
2
I
SATA_TX_P
3
I
SATA_TX_N
4
GND
GND
5
O
SATA_RX_N
6
O
SATA_RX_P
7
PWR
GND
MH2
PWR
P5V (For Apacer* SATADOM)
GND (For SATA)
8.5.4 M.2 SATA Connector (J2G1)
The Intel® Server Board S1200SPL and S1200SPO support one 22x42mm enterprise M.2 SATA SSD. In order
to use M.2 device, a SATA cable need to be connected between any of the SATA connectors (SATA-0 to SATA-
7, recommend SATA-7 for better cable routing) and the SATA connector (black) next to the jumpers. See
illustration below. The cable shown can be purchased separately.
Figure 21. Installing M.2 Device

Intel S1200SPL Specifications

General

Brand	Intel
Model	S1200SPL
Category	Server Board
Language	English