Intel SE7520JR2 Technical Manual

Intel® Server Board SE7520JR2 System BIOS
Revision 1.0
C78844-002
87
4.4.2.2.1 Processor Configuration Sub-menu
Table 21: BIOS Setup, Processor Configuration Sub-menu Options
Feature Options Help Text Description
Configure Advanced Processor Settings
Manufacturer Intel N/A Displays processor
manufacturer string
Brand String N/A N/A Displays processor brand ID
string
Frequency N/A N/A Displays the calculated
processor speed
FSB Speed N/A N/A Displays the processor front-
side bus speed.
CPU 1
CPUID N/A N/A Displays the CPUID of the
processor.
Cache L1 N/A N/A Displays cache L1 size.
Cache L2 N/A N/A Displays cache L2 size.
Cache L3 N/A N/A Displays cache L3 size. Visible
only if the processor contains
an L3 cache.
CPU 2
CPUID N/A N/A Displays the CPUID of the
processor.
Cache L1 N/A N/A Displays cache L1 size.
Cache L2 N/A N/A Displays cache L2 size.
Cache L3 N/A N/A Displays cache L3 size. Visible
only if the processor contains
an L3 cache.
Processor Retest
Disabled
Enabled
If enabled, all processors will
be activated and retested on
the next boot. This option will
be automatically reset to
disabled on the next boot.
Rearms the processor sensors.
Only displayed if the Intel
Management Module is
present.
Max CPUID Value Limit
Disabled
Enabled
This should be enabled in
order to boot legacy OSes that
cannot support processors
with extended CPUID
functions.
Hyper-Threading Technology Disabled
Enabled
Enable Hyper-Threading
Technology only if OS
supports it.
Controls Hyper-Threading state.
Primarily used to support older
Operating Systems that do not
support Hyper Threading.
Intel ® Speed Step ™ Tech Auto
Disabled
Select disabled for maximum
CPU speed. Select enabled
to allow the OS to reduce
power consumption.
Note: This option may not be
present in early Beta releases.

Intel SE7520JR2 Specifications

General

Brand	Intel
Model	SE7520JR2
Category	Computer Hardware
Language	English