Invacare Auriga - Repairing the flat tyre

49
10.1.1.4 Repairing the flat tyre
Requirements (General)
• Repair kit for inner tubes or an new inner tube.
• Talcum powder
• Socket spanner, 13 mm
Requirements (3-Wheel Version - front wheel):
• Allen key, 6 mm
• Remove the valve cap.
• Let the air out of the tyre by pressing the pin in the
centre of the valve in.
• Remove the 4 nuts (1) from the rear of the wheel
using the 13 mm spanner (3-Wheel Version - front
wheel: counter the bolts from the other side using
the 6 mm Allen key).
• Remove the rim halves from the tyre and take out
the inner tube.
• Repair the inner tube and re-fit, or replace it with a
new one.