Invacare Auriga - Dismantling the scooter for transport; Removing the seat

51
11 Dismantling the scooter for transport
To dismantle the scooter for transport, proceed as follows:
• Remove the seat
• Remove the batteries
• Remove the drive unit
• Remove the steering column
The scooter is re-assembled in reverse order.
11.1 Removing the seat
The lever for releasing the seat so that it can be
rotated and removed is located under the seat on
the right (1).
• Push the lever forward to release the seat.
• Rotate the seat to the side.
• Firmly grip the seat by the backrest and the
front edge and pull upwards to remove it.