INVT Goodrive300-01A Series User Manual

Goodrive300-01A series VFD for air compressor Product overview
-5-
Category
Function
Specification
Fault protection function
Over 30 kinds of fault protection functions:
overcurrent, overvoltage, undervoltage,
overtemperature, phase loss, overload, fan
current imbalance, etc.
Fan protection function
Overload protection: 1 min at 120% overload;
48s at 130% overload; 24s at 150% overload;
8s at 160% overload; 5s at 200% overload; 1s
at 300% overload
Current imbalance protection: when any two
phases differ from each other by 60–75%, stop
at fault, action time ≤5s
Output short-circuit protection: the protection
can be implemented by using the internal fuse
(applicable to single VFD integrated machine
only)
Output short-to-ground protection: the
protection can be implemented by using the
internal fuse (applicable to single VFD
integrated machine only)
Solenoid valve port protection
220V/110V output short-circuit protection: the
protection can be implemented by using the
internal fuse (applicable to single VFD
integrated machine only)
485 communication
One 485 communication (three terminal
interfaces)
Others
Installation mode
Wall installation, flange installation
Temperature of running
environment
-10–50°C , derating is required if the
temperature exceeds 40°C ; derate by 1% for
every increased 1°C
Protection level
IP20
Pollution level
Level 2
Cooling mode
Forced-air cooling
DC reactor
Optional built-in DC reactor for 7.5–11kW;
Built-in DC reactor is included in standard
configuration for 15–110kW;
Optional external DC reactor for 132–200kW
EMC filter
Built-in C3 filter is included in standard
configuration. ECM filter is set to be invalid by
default, if it is necessary to enable it, users can
connect J10 (see 3.1.3 and 3.1.4 for the

INVT Goodrive300-01A Series Specifications

General

Brand	INVT
Model	Goodrive300-01A Series
Category	DC Drives
Language	English