INVT SV-DA200 Series Technical Guide

INVT SV-DA200 AC Servo Drive PROFINET Technical Guide V2.63
1
1 Hardware configuration
1.1 Terminal wiring
With a built-in PROFINET communication card, SV-DA200 PROFINET servo drive has similar external
appearance with standard DA200, but different from DA200 in CN1 terminal pins, which are described in
section 1.3. The structure of the SV-DA200 series servo drive is as follows:
The PROFINET communication card uses two standard RJ45 interfaces, which do not distinguish the
direction and can be swappable. (Note: When the IRT function is used, the CN3 interfaces are selected
based on the upper computer settings, of which the downstream interface is Port1 and the upstream
interface is Port2.) The interface diagram is as follows.
Two standard RJ45 interfaces
Pin
Name
Description
1
TX+
Transmit Data+
2
TX-
Transmit Data-
3
RX+
Receive Data+
4
Vcc
LED power supply

INVT SV-DA200 Series Specifications

General

Brand	INVT
Model	SV-DA200 Series
Category	Servo Drives
Language	English