ITech IT6000C Series User Manual

Basic Operation
The detailed parameter description is as below.
Ext-Program External analog function menu
On / Off Function switch:
• On: Turns on the external analog function.
In this state, the channel parameters cannot
be set.
• Off: Turns off the external analog function.
In this state, the channel parameters can be
set.
Ch1 Set the parameters of channel 1 (programmed
channel).
Mx Indicates the slope factor of channel 1.
Mb Indicates the offset of channel 1.
Ch2 Set the parameters of channel 2 (upper limit
channel).
Mx Indicates the slope factor of channel 2.
Mb Indicates the offset of channel 2.
Ch3 Set the parameters of channel 3 (lower limit
channel).
Mx Indicates the slope factor of channel 3.
Mb Indicates the offset of channel 3.
• CV priority: The actual output voltage Vs will be adjusted according to the
parameter setting of Ch1 and the input voltage of the corresponding pin.
And, the current upper limit I+ will be adjusted according to the parameter
setting of Ch2 and the input voltage of the corresponding pin, the current
lower limit I- will be adjusted according to the parameter setting of Ch3 and
the input voltage of the corresponding pin.
• CC priority: The actual current voltage Is will be adjusted according to the
parameter setting of Ch1 and the input voltage of the corresponding pin.
And, the voltage upper limit Vh will be adjusted according to the parameter
setting of Ch2 and the input voltage of the corresponding pin, the voltage
lower limit Vl will be adjusted according to the parameter setting of Ch3 and
the input voltage of the corresponding pin.
Copyright © Itech Electronic Co., Ltd.
185

ITech IT6000C Series Specifications

General

Brand	ITech
Model	IT6000C Series
Category	Power Supply
Language	English