Inspection and Installation
2.2 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect with
the appearance of the items, contact the dealer from which you purchased the
instrument immediately.
The package contents include:
Item Qty. Model Remarks
Bi-directional Pro-
grammable DC Power
Supply
x1 IT6000C
Series
For the specific models in-
cluded in this series, refer
to 1.1 Brief Introduction.
Power cord x1 - Depending on the instru-
ment model.
For details, see 2.4 Con-
necting the Power Cord.
USB communication
cable
x1 - This accessory is se-
lected when the USB in-
terface is used for starting
up remote operation.
Ex-factory Test Report x1 - It contains the test report
and calibration report of
the instrument before
delivery.
Communication card
(optional)
X IT-E166/IT-
E167
IT-E166 (GPIB communi-
cation card) and IT-E167
(Analog/RS232 communi-
cation card) are non-
standard accessories.
The actual delivery quan-
tity is subject to the user's
order.
Upon verification of the shipment, keep the package and relevant contents
thereof in a safe place. When returning the instrument for warranty service or
repair, the specified packing requirements shall be met.
Copyright © Itech Electronic Co., Ltd.
22
To Next Page
Loading...
Need help?
General
