ITech IT7622 User Manual

Basic Operations
Copyright ©ITECH Electronic Co., Ltd. 34
3.9 Switching Local/Remote Mode
You can press the local button to change the AC source from remote to local
operation.
After you power on the AC source, it defaults in local mode, all buttons are
enabled. While in remote mode, most buttons are disabled except Local keys.
You can switch Local/Remote mode via PC. In addition, the mode modificaton
will not affect the output parameters.
3.10 Menu Operation
3.10.1 Menu description
Press the composite key [Shift]+[Setup] (Menu) to enter the menu function. At
this time, LCD displays optional menus.Operate the menu by pressing soft keys.
Select and edit the menu items by pressing the Up, Down, Left and Right keys.
Specific menu items are shown below.
MENU
System
Information
System
Information
Product Name
Instrument Name
Serial Instrument SN
Software Version Instrument Version
MAC
Software MAC address
System
Configure
System
Configure
Date(YY/MM/DD)
System date: Year/Month/Day
Time(hh:mm:ss)
System time:
Hour/Minute/Second
Brightness
Set the screen brightness.
Beeper
Set the keyboard sound
 ON: Buzzer on
 OFF: Buzzer off
System Reset
System Reset
POSETUP Off/On
Logger Interval Logger storage interval
System Setup
System Setup
Trig Source
Set the trig source:
 Key
 Software
 Bus

External
Loop Speed
Output loop speed control, with
two options:
 Slow:Slow speed
 Fast: fast speed
Control the loop stability. If the
capacitive or inductive load is
connected, select “Slow”. If the
resistive load is connected,
select “Fast”.
Ext-Ctrl
External simulation test:
 On

Off
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

ITech IT7622 Specifications

General

Brand	ITech
Model	IT7622
Category	Power Supply
Language	English