To Next Page

To Previous Page

List Function

6. Press soft key [Save/Edit] to save the self-defined waveform file. During

List operation, the self-defined waveform file will be added in the

corresponding waveform selection list. As shown by the red box below.

Export a self-defined waveform file

1. Insert the USB disk into the USB interface of the front panel.

2. Press [List] on the front panel for List function configuration. Press soft key

[Self-defined Wave Edit].

3. Press soft key [Export]. Select the saved harWave csv file. Press [Enter]

for confirmation. This file will be exported into the USB disk.

8.4 THD Wave

The distorted waveform can simulate voltage harmonic wave in the circuit. The

user can set the extent to which the output voltage waveform deviates from the

Sin wave voltage and test the usage of the DUT under this circumstance.

ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com

ITech IT7622 User Manual

Other manuals for ITech IT7622