List Function
Copyright ©ITECH Electronic Co., Ltd. 60
Edit the self-defined waveform. Refer to 8.3 “Self-defined
Waveform” for details.
Surge/trapped wave. Refer to 8.2 “Surge/trapped wave” for
details.
2. Press [Create New] to enter the List file configuration interface.
Description of List display zone:
Mainly display the edited List. View the list by pressing [Next] and [Forward].
Description of soft buttons on the List interface:
Press it to insert a single step behind the current single
step.
Press it to delete the current single step.
Press it to select next single step.
Press it to select the previous step.
Download configuration parameters.
3. Press the Up/Down key to select each parameter in the List edit zone.
Besides, the user can set the starting step, run count, end state of the
waveform, waveform type, frequency and amplitude by operating the
number keys and soft keys.
Parameters of the List editing zone are as follows:
Edit the starting steps of the List file.
List editing
zone
Soft buttons
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
