en-57
JACOBSEN AR3
SAFETY, OPERATORS & MAINTENANCE MANUAL
11 TROUBLESHOOTING
11.2.2 Step Cutting
NOTE: Arrow indicates direction of travel.
Step cutting occurs when grass is cut taller on one
side of a cutting unit than the other or on one side
of mower to the other. This is usually caused by
mechanical wear or an incorrect roller or deck
caster adjustment.
esuaCelbaborPydemeR
tnereffiderasgnittes)tuc-fo-thgieh(COH
rorehtoehtottinugnittucafoedisenomorf
.rehtona
ottinugnittucenomorf
&straPotrefeR(.stinugnittucfotnemtsujdaCOHkcehC
).launaMecnanetniaM
.sleehwretsackc
edrosgniraebrellornroW .sleehwretsackcedro/dnasgniraebrellorecalper/kcehC
.detcirtsersitnemevomtinugnittuC .noitcirtsertnemevomtinugnittucevomer/kcehC
ytisnedfrutnisnoitairaV.noitceridgniwomegnahC
.edisotedis
nevenusithgiehedirenihcaM
straPotrefeR(.erusserpnoitalfnieritreporptsujda/kcehC
).launaMecnanetniaM&
.ed
isotedisnevenusithgiehtinugnittuC .noitubirtsidthgiewrewomneveroftsujda/kcehC
To Next Page
Loading...
Need help?
General
