EasyManuals Logo
Home>Jacobsen>Lawn Mower>G-Plex III

Jacobsen G-Plex III User Manual

Jacobsen G-Plex III
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
en-12
JACOBSEN G-PLEX III Series: FH & FJ
SAFETY AND OPERATORS MANUAL
4.10 CUTTING PERFORMANCE
Cutting Frequency
7-knife reel - 7.4mm at 6km/h
9-knife reel - 5.7mm at 6km/h
11-knife reel - 4.7mm at 6km/h
4.9 FUEL RECOMMENDATIONS - GASOLINE
Fuel tank should be filled to within 1/2, (13mm)
below the bottom of the filler neck. DO NOT overfill
the tank.
Unleaded gasoline 87 Octane or higher
We DO NOT recommend the use of ALCOHOL
bearing fuels in any of our products. The use of
these fuels may create a potential safety hazard.
NOTE: The use of alcohol bearing fuels can
cause engine malfunction, particularly "vapour lock"
at temperatures above 50° F (10°c C).
NOTE
NEVER use No. 2D at temperatures below
20°F (-7°C) unless you are sure it has been
“winterized”. Cold temperatures will cause
fuel to thicken which may keep your engine
from running.
If No. 1D is not available, a “winterized” blend
of No. 1D and No. 2D may be available. This
blended fuel is usually called No. 2D also and
may be used in colder temperatures.
If the vehicle fuel tank is being filled for the
first time or if the vehicle was allowed to run
out of fuel, it will be necessary to bleed the
air from the fuel system (refer to “Bleeding
The Fuel System" in the Maintenance manual
).
4.8 FUEL RECOMMENDATIONS - DIESEL
Fuel tank should be filled to within 1/2", (13mm)
below the bottom of the filler neck. DO NOT overfill
the tank.
Use #2 diesel fuel (ASTM No. 2D) when
temperature is above 20°F (-7°C).
Use #1 diesel fuel (ASTM No. 1D) when
temperature is 20°F (-7°C) or below.
4 SPECIFICATIONS
Gasoline containing ALCOHOL can cause
deterioration of some non-metallic
materials in the fuel system.
Fuel hoses must be inspected frequently
and replaced if excessive stiffness,
deterioration or fuel leakage is found.
Gasoline Containing ALCOHOL will
attract and hold moisture inside fuel
tanks. Moisture may cause corrosion of
metallic parts within the fuel system.
Fuel leakage from a fuel system can
occur while the system is in use, in
transit, or in storage. Such leakage can
contribute to an explosion or fire, causing
serious bodily injury or death.
WARNING

Table of Contents

Other manuals for Jacobsen G-Plex III

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacobsen G-Plex III and is the answer not in the manual?

Jacobsen G-Plex III Specifications

General IconGeneral
BrandJacobsen
ModelG-Plex III
CategoryLawn Mower
LanguageEnglish

Related product manuals