Jacobsen G-Plex III User Manual

en-62
JACOBSEN G-PLEX III Series: FH & FJ
SAFETY AND OPERATORS MANUAL
1. Seat Adjustment Lever
10.9 SEAT ADJUSTMENT LEVER
Pull out on the adjustment lever located under the
left side of the seat. Slide the seat to the desired
position and release the lever.
10 ADJUSTMENT
4
10.8 ADJUSTING SPEED CONTROL SWITCH
The speed control switch is positioned under the
control panel. The slider/switch mechanism (3) is
activated when the speed control lever is cycled
from the Transport and mow positions. .
To set the adjusting bolt, position the control lever in
the "mow" position, loosen nuts (4), and adjust bolt
until head depresses the switch plunger. Tighten
nuts. Cycle control lever to the "transport" position,
to ensure bolt head is clear of switch.
To ensure correct set-up, the cylinders MUST only
rotate when the switch is depressed. i.e the Mow
position.

Jacobsen G-Plex III Specifications

General

Brand	Jacobsen
Model	G-Plex III
Category	Lawn Mower
Language	English