Jacobsen G-Plex III User Manual

en-55
JACOBSEN G-PLEX III Series: FH & FJ
SAFETY AND OPERATORS MANUAL
10.1 CUTTING HEAD MAINTENANCE
CLEANING
The cutting heads should be washed after use each
days and dried as well as possible to prevent rust.
All cutting surfaces (reel and bedknife) should be
given a light coating of oil or other anti-rust
compound.
LUBRICATION
The lubrication fittings at each end of both the front
and rear rollers, as well as the reel bearings at each
end should be lubricated periodically (approximately
once each week). Use only enough lubricant to
keep the bearings from drying out. Too much
lubricant may drop from mower onto turf, causing
damage to the grass.
1. Lubrication Fittings
10 ADJUSTMENT

Jacobsen G-Plex III Specifications

General

Brand	Jacobsen
Model	G-Plex III
Category	Lawn Mower
Language	English