Jacuzzi J-385 User Manual

30
J-300
10.7 Jets
The water ow through individual jets in your spa can be
adjusted or turned off by rotating the outside jet ring. Some jets
offer an adjustable center nozzle that allows you to change the
water discharge angle. Simply tilt the center nozzle in these jets
to the desired angle to customize your personal massage. Other
jets offer a spiral action that produces a surging stream of air
and water that provides a vigorous massage.
Note: Always keep at least 6 adjustable jets open at all times to ensure
proper ltration characteristics within the spa.
10.8 Selecting Desired Massage Action
All models incorporate a massage selector valve that allows
you to customize the massage and performance by diverting
water between various jet systems within the spa. Simply turn
valve to positions A, B or C to divert water pressure to various jet groups.
Note: The valve is intended to operate in positions A (Combo), B, or C
for optimum performance. It is considered normal for sound levels within
the valve to increase between these positions due to the large amounts
of water owing through it. For optimum ltration benets, always leave
this valve in position A when the spa is covered and select positions B or
C for maximum jet performance during spa use.
10.9 Waterfall Feature
The waterfall feature allows you to independently control
it for a customized soothing effect.
For J335-J385
The waterfall is on when the circulation pump is on. The JETS 1 (
1
) or
CLEARRAY ( ) buttons will also activate the waterfall feature.
For J315 and J325
The waterfall is on when the jets pump 1 is on.
Waterfall Operation Details:
A. Push thumb wheel on top of waterfall to the left (while in spa) to start
or increase ow.
B. Push thumb wheel on top of waterfall to the right (while in spa) to
slow or turn ow off.
Note: When the waterfall is in the OFF position, some water may still
ow through. This is considered normal.
10.10 CLEARRAY on Demand
The CLEARRAY on demand feature activates the water
purication system for a period of 1-hour. Press the button to
turn the system on. During this time the circulation pump and
the CLEARRAY unit are on.
Note: When the CLEARRAY system is on, due to a programmed or
scheduled setting, the feature cannot be turned off.
CB
A

Jacuzzi J-385 Specifications

General

Brand	Jacuzzi
Model	J-385
Category	Hot Tub
Language	English