Jacuzzi J-385 User Manual

34
J-300
• Light Mode: The screen will display “LT” and scroll “LIGHT
MODE.”
• Heavy Mode: The screen will display “HVY” and scroll “HEAVY
MODE.”
3. Once a selection is made, press
1
to conrm and activate the
setting. The system will return to the “SECONDARY FILTER” Menu.
11.3 Programming the Heating Mode
Your Jacuzzi spa is equipped with 3 modes of heating. An automatic
mode called “AUTO,” where the spa’s temperature is maintained at all
times. An energy saving heating cycle called “ECO.” A mode that will only
activate the heater during the daytime called “DAY” mode.
Note: The heater will activate when the temperature drops 2° from the
set temperature.
• Economy Mode is an energy savings program. The spa is
allowed to heat between 5:00 PM and 7:00 AM every day. The
hours are not programmable.
• Day Mode allows the spa to heat during the day, between 7:00
AM to 5:00 PM. The hours are not programmable.
• Auto Mode allows the heater to heat, at all times, in order to
maintain the preset temperature.
A. Programming the Heating Mode
To change the programmed heating mode:
Note: If no button is pressed within 5 seconds of each selec-
tion the screen will revert back to the Main Menu and the current settings
will remain active.
1. Press until you get to the “HEAT” Menu. The display will scroll
“HEATER MODE.” After the second scroll, if no action is taken, the
system will revert back to the Main Menu.
2. Press or to prepare the system for changes. Continually press
to scroll through the following modes:
• Economy Mode: The screen will display “ECO” and scroll
“ECONOMY MODE.”
• Day Mode: The screen will display “DAY” and scroll “DAY
MODE.”
• Auto Mode: The screen will display “AUTO” and scroll “AUTO
MODE.”
3. Once a selection is made, press
1
to conrm and activate the
setting. The system will return to the “HEATER MODE” Menu.

Jacuzzi J-385 Specifications

General

Brand	Jacuzzi
Model	J-385
Category	Hot Tub
Language	English