EasyManuals Logo
Home>Jacuzzi>Hot Tub>J-385

Jacuzzi J-385 User Manual

Jacuzzi J-385
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
36
J-300
11.6 Programming the Water Refresh Timer
A programmable water refresh timer can be set to remind you when to
when it is time to drain and rell your spa.
The default setting is for 180 days.
The timer range is from OFF to 180 days, in increments of 30 days.
Note: It is not recommended that this feature be turned OFF. In order to
continually maintain the water healthy and clean, in addition to chemical
maintenance, it should be program as instructed.
A. Programming or resetting the timer.
Note: If no button is pressed within 5 seconds of each selec-
tion the screen will revert back to the Main Menu and the cur-
rent settings will remain active.
1. Press until you get to the H2O Menu. The display will scroll
WATER REFRESH.” After the second scroll, if no action is taken,
the system will revert back to the Main Menu.
2. Press or to prepare the system for changes. Continually press
to adjust the length of time for the timer.
3. Once you select the number of days, press
1
to conrm this
selection. The system will return to the WATER REFRESHMenu.
4. Once the timer expires the display will alternate between the water
temperature and CHANGE WATERpage 52.
11.7 Programming the Time
To program the time, follow the steps below:
Note: If no button is pressed within 5 seconds of each selec-
tion the screen will revert back to the Main Menu and the current settings
will remain active.
1. Press until you get to the TIME Menu. The display will scroll
SET TIME.” After the second scroll, if no action is taken, the system
will revert back to the Main Menu.
2. Press or to display the current time.
3. Press or to prepare the system for changes.
4. Press or to adjust and program the correct hour. Press
1
to
save the change and move on to program the minutes.
5. The current minutes will blink as an indication that it is ready. Press
or to adjust and program the minutes. Press
1
to save the
change and move on to program either AM or PM.
6. The current setting will blink as an indication that it is ready. Press
or to toggle between AM and PM. Once selected, press
1
to
save the change. The system will return to the SET TIMEMenu.

Table of Contents

Other manuals for Jacuzzi J-385

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacuzzi J-385 and is the answer not in the manual?

Jacuzzi J-385 Specifications

General IconGeneral
BrandJacuzzi
ModelJ-385
CategoryHot Tub
LanguageEnglish

Related product manuals