44
J-300
4. Do not walk, sit or stand on the cover.
5. Do not drag or use the aps/skirt or the cover lock straps to remove
the cover.
6. Use only recommended cover lift systems.
7. Use only chemicals and cleaners recommended by Jacuzzi.
8. Remember to keep spa covered when not in use. Maintaining proper
water levels assures efcient operation and efcient electrical usage.
9. Do not expose your spa to the sun for extended periods of time as
UV rays can damage the interior surface.
10. Use caution when removing cover. Before removing cover, assure all
locks have been released to avoid lock breakage and or cover strap
damage.
12.6 Tool Free Access Door
The Tool Free Access door provides fast
access to the equipment bay and components
without the need of tools. To remove the door,
follow the steps below.
Note: To avoid any injuries, more than one indi-
vidual must perform these steps.
1. Locate the door’s retractable push button on
the top of the front panel, Figure A.
2. Press the retractable push button to release
the panel door from the spa frame, Figure B.
3. Slowly and gently tilt the panel forward
to remove, Figure C. This will expose the
equipment bay for easy access to the
components. Place the panel in a safe
location to prevent from damaging it.
4. To reinstall the panel just follow the steps
above in reverse order.
Figure C
Figure A
Figure B
To Next Page
Loading...
Need help?
General
