Page 2
Table of Contents
Section 1. Important Safety Instructions ........ 3
Section 2. Package Contents .......................... 4
2.1 Pool Pump Suction Entrapment
Prevention Guidelines ............................ 7
2.2 Package Contents .................................. 9
Section 3. Product Compatibility....................10
Section 4. Remove the Pentair
®
Control Panel .................................11
4.1 Transformer located on
low voltage side ..................................... 11
4.2 Transformer located on
high voltage side .................................. 14
Section 5. Install the AquaLink RS
Conversion Kit .............................. 16
5.1 Apply the New Wiring Label ................. 16
5.2 New Transformer Installation ............... 17
5.3 Install Conversion Kit.............................18
5.4 Connect Sensor Wires ......................... 19
5.5 Connecting Heater to Low
Voltage Wiring ...................................... 19
5.6 Connecting Auxilliary Equipment
to PCB .................................................. 20
5.7 Finalize Hardware Installation .............. 20
5.8 Test the Equipment .............................. 21
Section 6. Program DIP Switch Settings ...... 21
6.1 DIP Switch Functions ........................... 21
6.2 DIP Switch Settings ............................. 23
6.3 DIP Switch Settings for
Solar/Heat Pump .................................. 24
Section 7. Install and Program the iQ20 ....... 25
Jandy
®
AquaLink
®
RS Conversion Kit
To Next Page
Loading...
Need help?
General
