• Run Auto-EQ
[F2]: Perform Auto-EQ.
DACS4 performs Auto-EQ only below 800Hz. Beyond correctly setting the level, no attempt is made to equalize
above 800Hz. You may observe significant response variations above 800Hz. As explained earlier in this manual, this
is a normal consequence of speakers interacting with the room. Attempts to EQ the high frequencies only degrades
system performance.
Figure 34:
Auto EQ
[F3]: Accepts settings.
Left and Right Ambient Calibration:
The calibration procedure for the ambient speakers is slightly different from the main speakers. This is because they are
dipoles, designed to minimize direct radiation in favor of diffused reflections. Also, their location, at the sides of the room,
has a very different effect on the ear/brain mechanism.
4.7
CALIBRATION WALK-THROUGH
52
To Next Page
Loading...
Need help?
General
