jcb G20QS User Manual

Maintenance
Fuel System
106 9831/0650-3 106
Engine Fuel Filter
Replace
1. Make the machine safe.
2. Get access to the engine compartment
3. Remove the sensor housing.
4. Unscrew and remove the filter element.
5. Fit a new element. Lubricate the gasket of the new cartridge. Do not fill the new cartridge with fuel.
6. Refit the sensor housing.
7. Bleed the fuel system.
8. Close the engine cover.
Figure 85.
A
B
A Filter element B Sensor housing
Water Separator
Clean
Draining the Water Separator
1. Make the machine safe.
2. If there is water but no sediment, open the tap to drain the water. If there is any sediment in the bowl replace
the fuel filter element.

jcb G20QS Specifications

General

Brand	jcb
Model	G20QS
Category	Portable Generator
Language	English