Preservation and Storage
Cleaning
81 9831/0650-3 81
Preservation and Storage
Cleaning
General
1. Stop the machine and allow it to cool for at least one hour. Do not attempt to clean any part of the machine
while it is running.
2. Ensure all electrical loads are disconnected and the generator is made safe by disconnecting at the breaker,
turning off the machine and activating the emergency stop switch.
3. Make sure that all electrical connectors are correctly coupled. If connectors are open fit the correct caps
or seal with water proof tape.
4. Make sure that the oil filler caps and dipstick are correctly installed.
5. Apply an approved cleaning and degreasing agent with a brush. Obey the manufacturers instructions.
6. Wipe the outer body with cloth.
To Next Page
Loading...
Need help?
General
