6 - 1
Direct Glazing
The following procedures explain how to correctly remove
and install panes of glass that are directly bonded to the cab
frame apertures. When carrying out the procedures, relevant
safety precautions must be taken.
1 Always wear safety glasses during both removal and
replacement.
2 Use protective gloves - heavy duty leather gauntlet type
gloves when cutting out the broken glass; 'non-slip' type
gloves when handling/moving panes of glass; surgical
type gloves when using the polyurethane adhesives.
3 Wear protective overalls.
4 DO NOT smoke - the activators and primers used in the
procedures are highly flammable.
5 Do not attempt to handle or move panes of glass unless
you are using glass lifters (see Service Tools, Section
1).
Several special tools are required to successfully complete
the removal and replacement procedures. Reference is
made to the tools in the text. The majority of these tools can
be obtained locally and the remainder from JCB Service (see
Service Tools, Section 1).
The work must only be carried out in a dry, frost free
environment. A protective canopy may be required or the
machine/frame must be moved to a sheltered area. In damp
or wet conditions, hinged doors and window frames can be
removed from the machine and taken to a more suitable (dry)
environment.
Glass should not be replaced at temperatures below 5°C
(41°F).
Removing the Broken Glass and Old Sealant
!!
WARNING
Always wear safety glasses when removing or installing
screen glass. Never use a power operated knife when
removing the sealant around a toughened glass screen.
The action of the knife could cause particles of glass to
be thrown with sufficient force to cause serious injury,
even when safety glasses are being worn. Use only hand
operated tools when working with toughened glass.
BF 2-3/1
Section B
Body & Framework
9803/6400
Section B
6 - 1
Issue 1
Cab
To Next Page
Loading...
Need help?
General
