Introduction
Safety Labels
16 16
9811/5700-7
Safety Labels
Introduction
T1-014_2
!MWARNING
Safety Labels
Safety labels on the machine warn you of particular
hazards. You can be injured if you do not obey the
safety instructions shown.
INT-1-3-11
Safety labels are strategically placed around the machine
to remind you of possible hazards.
If you need eye-glasses for reading, make sure you wear
them when reading the safety labels. Do not over-stretch
or place yourself in dangerous positions to read the safety
labels. If you do not understand the hazard shown on the
safety label, then refer to Safety Label Identification.
Note: The illustration(s) show a typical machine model.
Your machine may look different from the model shown.
Keep all safety labels clean and readable. Replace lost or
damaged safety labels. Make sure replacement parts
include safety labels where necessary. Each safety label
has a part number printed on it, use this number to order a
new safety label from your JCB distributor.
To Next Page
Loading...
Need help?
General
