87 87
9811/5700-7
Routine Maintenance
Service Requirements
Introduction
T3-095
Your machine has been designed and built to give
maximum performance, economy and ease of use under a
wide variety of operating conditions. Prior to delivery, your
machine was inspected both at the Factory and by your
Distributor to ensure that it reaches you in optimum
condition. To maintain this condition and ensure trouble
free operation it is important that the routine services, as
specified in this Manual, are carried out by an approved
JCB Distributor at the recommended intervals.
This section of the Manual gives full details of the service
requirements necessary to maintain your JCB machine at
peak efficiency.
A Service Manual for your machine is available from your
JCB Distributor. The Service Manual contains information
on how to repair, dismantle and assemble your machine
correctly.
It can be seen from the Service Schedules on the following
pages that many essential service checks should only be
carried out by a JCB trained specialist. Only JCB
Distributor Service Engineers have been trained by JCB to
carry out such specialist tasks, and only JCB Distributor
Service Engineers are equipped with the necessary
special tools and test equipment to perform such tasks,
thoroughly, safely, accurately and efficiently.
JCB regularly updates its Distributors advising them of any
product developments, changes in specifications and
procedures. Therefore only a JCB Distributor is fully able
to maintain and service your machine.
A Service Record Sheet or Book is provided which will
enable you to plan your service requirements and keep a
service history record. It should be dated, signed and
stamped by your Distributor each time your machine is
serviced.
Remember, if your machine has been correctly
maintained, not only will it give you improved reliability but
its resale value will be greatly enhanced.
Owner/Operator Support
JCB together with your Distributor wants you to be
completely satisfied with your new JCB machine. If you do
encounter a problem however, you should contact your
Distributor's Service Department who are there to help
you!
You will have been given the names of the relevant service
contacts at your Distributor when the machine was
installed.
To get the most from your Distributor please help them to
satisfy you by:
1 Giving your name, address and telephone number.
2 Quoting your machine model and serial number.
3 Date of purchase and hours of work.
4 Nature of the problem.
Remember, only your JCB Distributor has access to the
vast resources available at JCB to help support you. In
addition, your Distributor is able to offer a variety of
programmes covering Warranty, Fixed Price Servicing,
Safety Inspections, including weight tests, covering both
legal and insurance requirements.
Service/Maintenance Agreements
To help plan and spread the costs of maintaining your
machine, we strongly recommend you take advantage of
the many Service and Maintenance Agreements your
Distributor can offer. These can be tailor made to meet
your operating conditions, work schedule etc.
Please consult your JCB Distributor for details.
Initial Service and Inspection
T3-005_2
To further protect your machine's performance it is
essential your JCB Distributor carries out an initial service
and inspection when the machine is one month old or
when it has completed 100 hours of operation (whichever
To Next Page
Loading...
Need help?
General
