Automatic needle
threader
- Raise the needle to its highest
position
- Press lever (A) right down
- The threader automatically
swings to the threading
position (B)
- Take the thread round the
hook (C)
- Take the thread in front of the
needle so that the thread will
insert into the hook (D) from
bottom to top
- Release lever (A)
- Pull the thread through the
needle eye.
Turn power switch to ("O")!
Attention:
Bringing up the lower
thread
Hold the upper thread with the
left hand. Turn the handwheel
forwards until the needle is
raised. (1)
Pull on the upper thread to
bring the lower thread up
through the stitch plate hole.
Lay both threads to the back
under the presser foot. (2/3)
To Next Page
Loading...
Need help?
General
