109
The same information as that in the normal
maintenance inspection information screen is
displayed in the maintenance inspection information
screen.
When button (C) of the item you desire to change the
inspection time is pressed, the inspection time input
screen is displayed.
③ Input the inspection time.
When the inspection time is set to "0", the
maintenance inspection function stops.
When clear button
(D) is pressed, the
value returns to the initial value. The initial values
of the inspection time of respective items are as
follows.
･
Needle replacement : 0 (1,000 stitches)
･
Cleaning time : 0 (hour)
･
Oil replacement time : 0 (hour)
When ENTER
(E) button is pressed, the
inputted value is determined.
D
E
C
To Next Page
Loading...
