7
2. BASIC OPERATION OF IP-410
LK-1900A is explained as the standard in this Instruction Manual.
① Turn ON the power switch
When the power is turned ON first, the selection screen of the
language is displayed. Set the language used. (It is possible to
change with memory switch U239.)
② Select the pattern No. you desire to sew.
When the power is turned ON, the data input screen is displayed.
The shape which is selected at present in the center of the screen
is displayed on SHAPE SELECTION button
(A) and the
selection of the sewing shape can be performed when pressing the
button. For selecting procedure of the sewing shape, refer to
4.
PERFORMING SEWING SHAPE SELECTION, p.15
.
When READY key
（
B
）
is pressed, the back color of LCD
display is changed to green, and the sewing machine is set to the
sewing possible state.
For the pattern No., refer to the sewing shape list.
When the presser is raised, be careful that fingers are not
caught in the presser since the presser moves after having
lowered.
When ending the selection screen with CANCEL button
or ENTER button without selecting the
language, the selection screen of the language is again
displayed when turning ON the power next.
When turning OFF the power without pressing READY key,
the setting of "Pattern No.", "XY scale" and "number of
max. rotation" are not memorized.
B
A
To Next Page
Loading...
Need help?
General
