119
Information on the following 5 items is displayed
in the working measurement screen.
A : This item automatically displays the machine
working ratio from the time of starting the
measurement.
B : This item automatically displays the machine
speed from the time of starting the
measurement.
C : This item automatically displays the pitch
time from the time of starting the
measurement.
D : This item automatically displays the machine
time from the time of starting the
measurement.
E : Number of times of thread trimming is
displayed. Input the number of times referring
to the next step
③
.
③ The number of times of thread trimming.
When number of times of thread trimming
button
(E) in the previous page is
pressed, the number of times of thread
trimming input screen is displayed.
Input the value you desire with TEN keys or
+/- keys.
After the input, press ENTER button
(F)
* When the input value is "0", count of the
number of times of thread trimming is not
performed. Use this function by connecting
the external switch.
B
D
E
A
C
F
To Next Page
Loading...
Need help?
General
