24
③ Lower the presser with the foot switch.
④ Proceed stitching with the presser lowered.
Check the shape with PRESSER BACK button
(C)
and PRESSER FORWARD button
(D).
When holding pressing the button for a certain time, the
presser continues to move even when the button is
released.
When you desire to stop, press STOP button
(G).
When ORIGIN MOVE button
(F) is pressed, the
machine moves to the origin and the screen returns to the
sewing screen.
⑤ Finish checking the shape.
When CANCEL button
(E) is pressed, the screen
returns to the sewing screen.
When the presser is not in the sewing start position or the
sewing end position, press the foot switch. Then it is
possible to sew from the midway of checking.
The work clamp feet do not go up even when the
foot switch is detached.
When pressing the presser forward or presser
backward button with the needle bar lowered, the
presser moves after automatically returning the
needle bar to UP position. So, be careful.
C
E
D
F
G
To Next Page
Loading...
Need help?
General
